dot
Cannon 6K™ Wire Puller

iTOOLco Upgrades Cannon 6K Wire Puller

OAK RIDGE, TN. (July 2, 2018) – iTOOLco, a leading developer of products that increase safety, save time, lower worker effort, and improve results for hard-working contractors and the professionals they employ, announced today that it has upgraded its Cannon 6K™ wire puller. The new version of this top performing product (part number C6K.2) is faster and has an even broader application than the original Cannon 6K.

With a capacity of up to 6,000 lb., iTOOLco’s Cannon 6K™ has a 4-speed motor and dual capstans that pull at speeds up to 8′ and 28′ per minute on low and 20′ and 70′ feet per minute on high.  Fitted with a 30” extension for longer reach, the Cannon 6K™ is capable of pulling out 9’ of wire from the conduit opening to capstan and changes quickly from side pulls to overhead or underground. In addition, the foot switch now stores right on the wire puller.

“Anyone who knows iTOOLco knows we never stop innovating,” said David Jordan, President at iTOOLco. “When we spotted a way to improve this already-great product, we couldn’t pass up the opportunity to pass it on to our contractors. So we made it happen.”

Anchoring the Cannon 6K™is not required on most jobs. It is the only 6,000 lb. wire puller that can be attached to the receiver hitch on a truck and can be anchored in the event that anchoring is necessary. Fully self-contained and compact, all of the wire puller’s parts store right on the tool, so no gang box of parts needed. The Cannon 6K™ wire puller continues to be lightweight and easy to transport, making it the puller of choice for many electrical contractors and electricians.

About iTOOLco

Invented by Electricians for Electricians. For many years, iTOOLco has improved the work lives of professional electricians and contractors through our innovative products. Our primary focus is developing products that increase safety, save time, lower worker effort, and improve results for hard-working contractors and the professionals they employ. iTOOLco’s ingenious tooling delivers “measurable advantages” and brings innovation to your job site. Visit iTOOLco.com

Read more...

iTOOLco Launches First 6-Speed Wire Puller With Reverse Gear

OAK RIDGE, TN. (May 8, 2018) – iTOOLco, a leading developer of products that increase safety, save time, lower worker effort, and improve results for hard-working contractors and the professionals they employ, announced today the introduction of the industry’s first ever six-speed dual capstan wire puller with reverse gear – the iTOOLco Cannon 12K™.

With a capacity of up to 12,000 lb., iTOOLco’s Cannon 12K™’scustom reversible motor is sure to get even the heaviest wire pulls completed in record time.  The six-speed dual capstans pull at speeds up 5’, 10’ and 15’ per minute on low and 12’, 24’, and 36’ per minute on high.

“Contractors told us they wanted a wire puller with a larger capacity and a reverse motor,” said David Jordan, President at iTOOLco. “We answered with the Cannon 12K and the contractors who have seen it in action are thrilled with its performance.”

The Cannon 12K™ has an adjustable counter-balance for easy setup and a 15 lb. working weight, making it easy for one person to maneuver.  Rear swiveling casters make job site transportation and precise conduit positioning safer and faster.

Fitted with extensions in 33” and 15” for longer reach, the Cannon 12K™ is capable of pulling out 13’ of wire from the conduit opening to capstan and changes quickly from side pulls to overhead or underground. Anchoring is not required on most jobs. Fully self-contained and compact, all of the wire puller’s parts store right on the tool, so no gang box of parts needed. It is the only 12,000 lb. wire puller that can be attached to the receiver hitch on a truck and comes with an extra receiver hitch adapter in the even that anchoring is necessary.

About iTOOLco

Invented by Electricians for Electricians. For many years, iTOOLco has improved the work lives of professional electricians and contractors through our innovative products. Our primary focus is developing products that increase safety, save time, lower worker effort, and improve results for hard-working contractors and the professionals they employ. iTOOLco’s ingenious tooling delivers “measurable advantages” and brings innovation to your job site. Visit iTOOLco.com

Read more...
Jack Stands - iTOOLco Real Jacks in the field for wire pulling

iTOOLco Job Site Photos: Wire Pulling Prep

Preparing for wire pulling, iTOOLco Real Jacks jack stands, Real Tender rope tender, and Real Spool are on stand by and ready to help make this wire pull a faster, safer workspace.

Real Jacks are innovative jack stands featuring four 20,000 lb. sealed bearings that capture the axle. Real Jacks prevent reels from traveling during a wire pull — and best of all they won’t tip over.

The iTOOLco Real Tender is a smarter rope tender.  Light and maneuverable, it’s easy for one person to set up and transport. It can also be used horizontally or vertically making it flexible on the job.

Our Real Spool is a lightweight steel spool for pulling and managing rope.  Made from US 14 gauge steel, it holds up to 300 lb and won’t splinter or fall apart.

Jack Stands - iTOOLco Real Jacks in the field for wire pulling

iTOOLco Real Jacks – jack stands with a closed arbor.

 

 

 

 

 

Rope tender - the iTOOLco Real Tender on the jobsite for a wire pull

iTOOLco Real Tender and Real Spool.

 

 

Read more...
36" Multi-Roller™
24" Multi-Roller™
36" Multi-Roller™

iTOOLco Launches New Multi-Rollers in 24” and 36” Sizes

OAK RIDGE, TN. (May 4, 2017) – iTOOLco, a leading developer of products that increase safety, save time, lower worker effort, and improve results for hard-working contractors and the professionals they employ, announced today the introduction of Multi-Rollers™ in two sizes – 24” and 36”.

iTOOLco Multi-Rollers were designed with adjustable picking arms that allow users to fine tune the adjustment angle without extra rigging during wire pulls. Both sizes have two picking arms – each with five adjustment holes so rigging the perfect angle is quick and easy.

Multi Rollers also feature 5” wide profiled phenolic rollers that ride on rated bearings. With extra deep side walls (made from 1/4″ 6061 aluminum) for light weight durability, wire stays safely nested between the tool’s side walls during wire pulls. Perfect for vertical pulls, Multi-Rollers can also be installed horizontally for navigating difficult corners.

“Our new Multi-Rollers are much easier to rig at the proper pulling angle because of the flexibility of the adjustable picking arms,” said David Jordan, President at iTOOLco. “The opportunities to reconfigure for any job are unlimited.”

The 36” Multi-Roller (MR36) has a 36” radius, is 58.66″L x 6″W x 24″H and weighs 83 lb. The 24” Multi-Roller (MR24) has a 24” radius, is 42.5″L x 6″W x 24″H and weighs 70 lb. Both Multi-Rollers come with a six year warranty and are manufactured in the USA with global components.

About iTOOLco

Invented by Electricians for Electricians. For many years, iTOOLco, formerly Innovative Tool, has been improving the work lives of professional electricians through our innovative products. Our primary focus is developing products that increase safety, save time, lower worker effort, and improve results for hard-working contractors and the professionals they employ. iTOOLco’s ingenious tooling delivers “measurable advantages” and brings innovation to your job site. Visit iTOOLco.com

Read more...

iTOOLco

iTOOLco logo orange