WHAT ACCESSORIES ARE AVAILABLE FOR YOUR PULLER?

Let’s look at what each accessory can do.

Manhole Adapter (MHA1)

iTOOLco 24” OR 36“ Multi-Rollers and CK-60 required for use.
A secure platform that fits over manholes 18”- 36“ to make pulling wire
through manholes easy.
Designed to work with any iTOOLco puller from the Cannon 6K
to Cannon 12K.

Swivel Lifting Coupling (SLC30; SLC35; SLC40;
SLC50; SLC60)

The Swivel Lifting Coupling is used to keep conduit in a level position
while lifting. Available in five sizes from 3”- 6”.
SLC34- Swivel Lifting Coupling Kit 3”-4”
SLC56- Swivel Lifting Coupling Kit 5”-6”.

10K Curb Roller (CR10)

A roller to help pull wire over curbs, into manholes or over any
edge.
10,000 lbs. capacity

20K Curb Roller (CR20)

A roller to help pull wire over curbs, into manholes or over any edge.
20,000 lbs. capacity

Lock-In-Place Conduit Sheaves

Conduit sheaves that now lock in place at any angle and won’t damage your wire.
Available in sizes 2” – 6”.
Weight rating depends on pulling angle. See our website for details.

Hook-Type Aluminum Sheaves

Hook sheaves help change direction of cable during a pull. Our innovative
design also allows the user to remove cable from either side of the sheave
without disassembly. Dual yoking capability with accessory hooks available.

12” Sheaves are good for pulls up to 12,000 lbs.*
18”, 24” and 36” Sheaves are good for pulls up to 20,000 lbs.

Extra Accessory Hook for Dual Yoking Available.

Multi-Rollers

Multi-Rollers help assist pulling wire around difficult corners or at tough angles. Use in manholes or at any inclination using adjustable picking arm set up.

Available with rollers 24”, 36” or 48” in diameter & good for up to 5,000 lbs.