Product Number: PS18-300, PS14-300, PS916-300, PS916-600, PS916-900, PS916-1200, PS916-CUST
NOTE: This rope is a high speed rope and is only meant to be used on high speed pullers. We cannot recommend using a high speed rope with our competitors low speed pullers and only recommend using these with our high speed pullers.
Using a low speed puller with high speed rope can cause damage to the rope.
-
- An innovative high-performance synthetic fiber wire pulling rope
- High tensile strength: 39,000 lb.
- 12 Strand single braided synthetic fiber
- Pound for pound stronger than steel
- Ultra-low stretch
- 25% Reduction in coefficient of friction compared to traditional pulling ropes
- 2/3 Lighter than traditional pulling rope
- Need only one size rope (9/16″) for pulls up to 39,000 lb. pulls
- Does not absorb water
- Dual factory installed pulling eyes, one on either end
- Lightweight
- Abrasion resistance for less fray
- Will not rot; no organics in rope
- UV resistant
PRODUCT NUMBER |
DESCRIPTION |
DIAMETER |
CIRCUMFERENCE |
LENGTH |
AVERAGE BREAKING STRENGTH |
TOTAL WEIGHT |
PS18-300 |
1/8″ x 300′ Pull Slick |
1/8″ |
N/A |
300′ |
2,800 lb. |
3 lb. |
PS14-300 |
1/4″ x 300′ Pull Slick |
1/4″ |
0.75″ |
300′ |
7,500 lb. |
6.5 lb |
PS916-300 |
9/16″ x 300′ Pull Slick |
9/16″ |
1.75″ |
300′ |
39,000 lb. |
26 lb |
PS916-600 |
9/16″ x 600′ Pull Slick |
9/16″ |
1.75″ |
600′ |
39,000 lb. |
52 lb |
PS916-900 |
9/16″ x 900′ Pull Slick |
9/16″ |
1.75″ |
900′ |
39,000 lb. |
77 lb |
PS916-1200 |
9/16″ x 300′ Pull Slick |
9/16″ |
1.75″ |
1200′ |
39,000 lb. |
103 lb |
PS916-CUST |
Custom Length Pull Slick |
9/16″ |
1.75″ |
N/A |
39,000 lb. |
N/A |
Reviews
There are no reviews yet.