dot
  • Cannon 10K™ Puller KnucklesCannon 10K™ Puller Knuckles

    Cannon 10K™ Puller Knuckles

    0 out of 5

    Upgrade your Cannon 10K Wire Puller Knuckles with the newest models. These super duty puller knuckles will perform on every wire pull.

  • Cannon 10K™ Wire Puller

    Cannon 10K™ Wire Puller

    5.00 out of 5

    iTOOLco’s Cannon 10K* is the fastest and strongest wire puller available. This versatile cable puller is easy to maneuver, and can be changed quickly from side pulls to overhead or underground. The Cannon 10K is the only 10,000 lb. wire puller that can be attached to the receiver hitch on a truck.

    • 4 Speed dual capstan
    • 9′ & 18′ (per min.) on low speed, 20′ & 40′ on high speed
    • Self-contained – ready to pull
    • Quickly change from side pull to overhead, underground or truck hitch
    • No gang box of parts
    • Adjustable counter-balance for easy setup and a 15 lb. working weight
    • Pulls out 13 feet of extra wire
    • Universal adapter – the universal adapter sits on the conduit lock nut, fits a wide range of sizes, and often eliminates the need to use the conduit adapters on lighter pull
    • No anchoring required
    • Easily maneuvers into tight spaces
  • Cannon 12K™ Wire Puller

    0 out of 5

    The only 6-speed puller with reverse gear, dual capstans and 12,000 lb. of pulling capacity.

    The fully self-contained, compact design of the Cannon 12K™ wire puller features the only speed reversible motor that is sure to get even the heaviest pulls done in record time. Designed specifically for easy set up to meet job site demands, all parts store right on the puller. No gang box of parts needed. When extra extensions are used, the wire puller is capable of pulling out 13′ of wire from the conduit opening. Gone are the days of pulling at only 6 feet per minute. iTOOLco’s Cannon 12K™ pulls at speeds up to 36 ‘ per minute. This versatile cable puller is easy to maneuver, and can be changed quickly from side pulls to overhead or underground. The Cannon 12K™ is the only 12,000 lb. wire puller that can be attached to the receiver hitch on a truck.

      • 12,000 lb. pulling capacity
      • Customized motor with reverse gear
      • 6 Speed dual capstan
      • 5′, 10′ & 15′ (per min.) on low speed, 12′, 24′ & 36′ on high speed
      • Self-contained – ready to pull
      • Quickly change from side pull to overhead, underground or truck hitch
      • No gang box of parts
      • Adjustable counter-balance for easy setup and a 15 lb. working weight
      • Extra 33” & 15” extensions allow for longer reach
      • Pulls out 13 feet of extra wire from conduit opening to capstan
      • Rear swiveling casters for job site transportation and precise conduit positioning
      • Universal adapter – the universal adapter sits on the conduit lock nut, fits a wide range of sizes, and often eliminates the need to use the conduit adapters on lighter pull
      • Extra receiver hitch adapter
      • No anchoring required
      • Easily maneuvers into tight spaces
  • Conduit AdaptersConduit Adapters

    Conduit Adapters

    0 out of 5

    Compatible with the Cannon 6K and the Cannon 10k wire pullers, iTOOLco’s 5″ and 6″ Conduit Adapters provide the ultimate flexibility on every wire pull.

  • Curb RollerCurb Roller

    Curb Roller by iTOOLco

    0 out of 5

    Rounding curbs, edges, or pipes on wire pulls has never been easier.  With iTOOLco’s Curb Roller, wire rides on 5 bearinged rollers for a smooth feed.

    • Four 1/2″ mounting holes provided for any unique feeding situation
    • Perfect for many different pulling and feeding situations – curbs, manholes, in and out of electrical boxes
    • Will roll rope or wire over any edge
    • Five rollers with bearings makes rounding edges smooth and easy
    • Use on feeds around any sharp corner
    • Five roller design make the tool lighter than typical curb roller
    • Use with iTOOLco Real Jacks
    • Mounts over 2″ rigid pipe
  • Heavy Duty Pipe Cart

    0 out of 5

    0%

      Click and drag the image to see a 360º view.

       

       

       

       

       

       

    1. Jack Rack™Jack Rack™

      Jack Rack™ for iTOOLco Real Jacks

      0 out of 5

      Transport multiple sets of Real Jacks jack stands & Real Axles easily.

      • Transport 5 Sets of Jacks and Axles at Once
      • Fits Through 30″ Doorways
      • Made From Sturdy US Steel
      • Convenient Fixed Handle for Hand Trucking About The Job Site
      • Heavy Duty Caster with Brakes
    2. Manhole Adapter™

      0 out of 5
      0%

        Click and drag the image to see a 360º view.

      1. Ratchet CuttersRatchet Cutters

        Ratchet Cutters for Cable Cutting

        5.00 out of 5

        • ACSR rated
        • Telescoping handles for added leverage
        • Cutting capacity of up to 1-3/4″ or 44mm
        • Large, comfortable grip
        • Includes handy carrying case
        • Blades have a 6 year limited warranty

      2. Real Big Jacks™ Jack StandsReal Big Jacks™ Jack Stands

        Real Big Jacks™ Jack Stands

        5.00 out of 5

        Real Big Jacks™ jack stands are an innovative way to transport and feed heavy spools of wire.

        • Holds up to 20,000 lb.
        • Made From US Steel
        • Axle Rides on 4 Large Bearing-ed Rollers
        • Feed From your Own Trailer
        • Transport Spools up to 10,000 lb. Without a Fork Lift (20,000 lb. with a fork lift)
        • Telescoping to Fit Different Width Spools
        • Load and Reload Without a Forklift
        • Easily Maneuver Spools Into Position

        Axles sold separately.

      3. Real Jacks™ Jack Stands

        Real Jacks™ Jack Stands

        0 out of 5

        iTOOLco’s Real Jacks make wire pulls run smooth and easy.  These innovative reel jack stands have four 20,000 lb. sealed bearings that capture the axle to prevent reels from traveling during the pull.  Best of all iTOOLco Real Jacks won’t tip over.

        • Closed head traps axle prevents it from falling out or traveling horizontally
        • Separate sides can be used safely on uneven ground
        • Won’t tip over
        • Store and transport Real Jacks right on the iTOOLco Real Tender or iTOOLco Jack Rack
        • Can be used with 22″ to 66″ spools
        • Fits Wemco reels
        • Easy to carry at 35 lbs. per side
        • Can be used with our axle, a 1.5″ solid or a 2″ rigid pipe
        • Set up in less than 1 minute
        • Four 20,000 lb. rated bearings make wire pulling smooth and easy
        • No drills or extra tools needed
      4. Roll Jacks 3072Roll Jacks 3072

        Roll Jacks 3072™

        0 out of 5

        Heavy wood spools and steel compartmentalized reels turn on a dime with innovative heavy duty casters that spin easy for precise control on
        the job site. Field loading and unloading spools from 30″ to 72″ in diameter is a snap because Roll Jacks 3072™ raises and lowers spools in seconds with only a wrench.

          • Adjusts to only 8″ wider than your spool
          • Built-in wrench raises and lowers the jack
          • Axle-less on spools under 3000 lb.
          • High-chromium content axle provided for spools over 3000 lb.
          • Handle carries ground wire when needed
          • Arbors slide in and out to engage spool
          • Fits steel reels with 1-5/8″ or 2″ arbor holes
          • Extending outrigger brakes and forklift pockets
          • Telescoping footprint
            • Outside Width Collapsed: 30.5“W
            • Outside Width Extended: 48“W
            • Accepts Spool Widths from 16″ – 40“W

      iTOOLco

      iTOOLco logo orange