dot
  • Cannon 10K™ Puller KnucklesCannon 10K™ Puller Knuckles

    Cannon 10K™ Puller Knuckles

    0 out of 5

    Upgrade your Cannon 10K Wire Puller Knuckles with the newest models. These super duty puller knuckles will perform on every wire pull.

  • Cannon 10K™ Wire Puller

    Cannon 10K™ Wire Puller

    5.00 out of 5

    iTOOLco’s Cannon 10K* is the fastest and strongest wire puller available. This versatile cable puller is easy to maneuver, and can be changed quickly from side pulls to overhead or underground. The Cannon 10K is the only 10,000 lb. wire puller that can be attached to the receiver hitch on a truck.

    • 4 Speed dual capstan
    • 9′ & 18′ (per min.) on low speed, 20′ & 40′ on high speed
    • Self-contained – ready to pull
    • Quickly change from side pull to overhead, underground or truck hitch
    • No gang box of parts
    • Adjustable counter-balance for easy setup and a 15 lb. working weight
    • Pulls out 13 feet of extra wire
    • Universal adapter – the universal adapter sits on the conduit lock nut, fits a wide range of sizes, and often eliminates the need to use the conduit adapters on lighter pull
    • No anchoring required
    • Easily maneuvers into tight spaces
  • Cannon 12K™ Wire Puller

    0 out of 5

    The only 6-speed puller with reverse gear, dual capstans and 12,000 lb. of pulling capacity.

    The fully self-contained, compact design of the Cannon 12K™ wire puller features the only speed reversible motor that is sure to get even the heaviest pulls done in record time. Designed specifically for easy set up to meet job site demands, all parts store right on the puller. No gang box of parts needed. When extra extensions are used, the wire puller is capable of pulling out 13′ of wire from the conduit opening. Gone are the days of pulling at only 6 feet per minute. iTOOLco’s Cannon 12K™ pulls at speeds up to 36 ‘ per minute. This versatile cable puller is easy to maneuver, and can be changed quickly from side pulls to overhead or underground. The Cannon 12K™ is the only 12,000 lb. wire puller that can be attached to the receiver hitch on a truck.

      • 12,000 lb. pulling capacity
      • Customized motor with reverse gear
      • 6 Speed dual capstan
      • 5′, 10′ & 15′ (per min.) on low speed, 12′, 24′ & 36′ on high speed
      • Self-contained – ready to pull
      • Quickly change from side pull to overhead, underground or truck hitch
      • No gang box of parts
      • Adjustable counter-balance for easy setup and a 15 lb. working weight
      • Extra 33” & 15” extensions allow for longer reach
      • Pulls out 13 feet of extra wire from conduit opening to capstan
      • Rear swiveling casters for job site transportation and precise conduit positioning
      • Universal adapter – the universal adapter sits on the conduit lock nut, fits a wide range of sizes, and often eliminates the need to use the conduit adapters on lighter pull
      • Extra receiver hitch adapter
      • No anchoring required
      • Easily maneuvers into tight spaces
  • Cannon 6K™ Wire Puller

    Cannon 6K™ Wire Puller

    5.00 out of 5

    The Cannon 6K is two wire pullers in one with dual capstans that can pull 8′ and 28′ per minute on low speed and 20′ and 70′ feet per minute on high speed.  This versatile wire puller is lightweight and easy to transport, making it the puller of choice for many electrical contractors and electricians.

    • 4 Speed dual capstan
    • 8′ & 28′ (per min.) on low speed, 20′ & 70′ on high speed
    • Self contained– ready to pull
    • Quickly change from side pull to overhead, underground or truck hitch
    • No gang box of parts
    • Pulls out 9 feet of extra wire
    • No anchoring required
    • Easy to transport
    • Telescoping
    • Easily maneuvers into tight spaces

  • Conduit AdaptersConduit Adapters

    Conduit Adapters

    0 out of 5

    Compatible with the Cannon 6K and the Cannon 10k wire pullers, iTOOLco’s 5″ and 6″ Conduit Adapters provide the ultimate flexibility on every wire pull.

  • Manhole Adapter™

    0 out of 5
    0%

      Click and drag the image to see a 360º view.

    1. Wire Puller Universal Adapter

      Universal Adapter for Wire Pullers

      0 out of 5

      The Universal Adapter is designed to be used on loads under 5000 lbs and no regular conduit insert adapter is needed.

    iTOOLco

    iTOOLco logo orange