• Jack Rack™Jack Rack™

    Jack Rack™ for iTOOLco Real Jacks

    0 out of 5

    Transport multiple sets of Real Jacks jack stands & Real Axles easily.

    • Transport 5 Sets of Jacks and Axles at Once
    • Fits Through 30″ Doorways
    • Made From Sturdy US Steel
    • Convenient Fixed Handle for Hand Trucking About The Job Site
    • Heavy Duty Caster with Brakes
  • Real Big Jacks™ Jack StandsReal Big Jacks™ Jack Stands

    Real Big Jacks™ Jack Stands

    5.00 out of 5

    Real Big Jacks™ jack stands are an innovative way to transport and feed heavy spools of wire.

    • Holds up to 20,000 lb.
    • Made From US Steel
    • Axle Rides on 4 Large Bearing-ed Rollers
    • Feed From your Own Trailer
    • Transport Spools up to 10,000 lb. Without a Fork Lift (20,000 lb. with a fork lift)
    • Telescoping to Fit Different Width Spools
    • Load and Reload Without a Forklift
    • Easily Maneuver Spools Into Position

    Axles sold separately.

  • Real Jacks™ Jack Stands

    Real Jacks™ Jack Stands

    0 out of 5

    iTOOLco’s Real Jacks make wire pulls run smooth and easy.  These innovative reel jack stands have four 20,000 lb. sealed bearings that capture the axle to prevent reels from traveling during the pull.  Best of all iTOOLco Real Jacks won’t tip over.

    • Closed head traps axle prevents it from falling out or traveling horizontally
    • Separate sides can be used safely on uneven ground
    • Won’t tip over
    • Store and transport Real Jacks right on the iTOOLco Real Tender or iTOOLco Jack Rack
    • Can be used with 22″ to 66″ spools
    • Fits Wemco reels
    • Easy to carry at 35 lbs. per side
    • Can be used with our axle, a 1.5″ solid or a 2″ rigid pipe
    • Set up in less than 1 minute
    • Four 20,000 lb. rated bearings make wire pulling smooth and easy
    • No drills or extra tools needed
  • Roll Jacks 3072Roll Jacks 3072

    Roll Jacks 3072™

    0 out of 5

    Heavy wood spools and steel compartmentalized reels turn on a dime with innovative heavy duty casters that spin easy for precise control on
    the job site. Field loading and unloading spools from 30″ to 72″ in diameter is a snap because Roll Jacks 3072™ raises and lowers spools in seconds with only a wrench.

      • Adjusts to only 8″ wider than your spool
      • Built-in wrench raises and lowers the jack
      • Axle-less on spools under 3000 lb.
      • High-chromium content axle provided for spools over 3000 lb.
      • Handle carries ground wire when needed
      • Arbors slide in and out to engage spool
      • Fits steel reels with 1-5/8″ or 2″ arbor holes
      • Extending outrigger brakes and forklift pockets
      • Telescoping footprint
        • Outside Width Collapsed: 30.5“W
        • Outside Width Extended: 48“W
        • Accepts Spool Widths from 16″ – 40“W


iTOOLco logo orange