dot
  • 24" Multi-Roller™24" Multi-Roller™

    24″ Multi-Roller™ by iTOOLco

    0 out of 5

    The 24″ Multi-Roller features extra wide, profiled phenolic rollers. Rollers ride on rated bearings. Extra deep side walls (made from 1/4″ 6061 aluminum) offer a light yet durable tool. The adjustable picking arms allow users to fine tune the adjustment angle without extra rigging.

    Sold As Shown. Perfect for vertical wire pulls, but can also be installed horizontally for navigating difficult corners.

    • Unlimited configuration opportunities
    • Extra wide 5″ profiled rollers, for smooth and easy pulling
    • Hooks have 8″ of adjustment
    • Extra Deep Sidewalls made of 1/4″ 6061 aluminum and keeps wire safely nested between walls during wire pulls
  • 24" Multi-Roller™36" Multi-Roller™

    36″ Multi-Roller™ by iTOOLco

    0 out of 5

    The 36″ Multi-Roller features extra wide, profiled phenolic rollers. Rollers ride on rated bearings. Extra deep side walls (made from 1/4″ 6061 aluminum) offer a light yet durable tool. The adjustable picking arms allow users to fine tune the adjustment angle without extra rigging.

    Sold As Shown. Perfect for vertical wire pulls, but can also be installed horizontally for navigating difficult corners.

    • Unlimited configuration opportunities
    • Extra wide 5″ profiled rollers, for smooth and easy cable pulling
    • Hooks have 8″ of adjustment
    • Extra Deep Sidewalls made of 1/4″ 6061 aluminum and keeps wire safely nested between walls during wire pulls
  • HandlesHandles

    Cable Puller & Jack Handles

    0 out of 5

    iTOOLco carries replacement handles for cable pullers –  Cannon 6K , Cannon 10K – and Real Jacks.

  • Cannon 10K™ Puller KnucklesCannon 10K™ Puller Knuckles

    Cannon 10K™ Puller Knuckles

    0 out of 5

    Upgrade your Cannon 10K Wire Puller Knuckles with the newest models. These super duty puller knuckles will perform on every wire pull.

  • Cannon 10K™ Wire Puller

    Cannon 10K™ Wire Puller

    5.00 out of 5

    iTOOLco’s Cannon 10K* is the fastest and strongest wire puller available. This versatile cable puller is easy to maneuver, and can be changed quickly from side pulls to overhead or underground. The Cannon 10K is the only 10,000 lb. wire puller that can be attached to the receiver hitch on a truck.

    • 4 Speed dual capstan
    • 9′ & 18′ (per min.) on low speed, 20′ & 40′ on high speed
    • Self-contained – ready to pull
    • Quickly change from side pull to overhead, underground or truck hitch
    • No gang box of parts
    • Adjustable counter-balance for easy setup and a 15 lb. working weight
    • Pulls out 13 feet of extra wire
    • Universal adapter – the universal adapter sits on the conduit lock nut, fits a wide range of sizes, and often eliminates the need to use the conduit adapters on lighter pull
    • No anchoring required
    • Easily maneuvers into tight spaces
  • Cannon 12K™ Wire Puller

    0 out of 5

    The only 6-speed puller with reverse gear, dual capstans and 12,000 lb. of pulling capacity.

    The fully self-contained, compact design of the Cannon 12K™ wire puller features the only speed reversible motor that is sure to get even the heaviest pulls done in record time. Designed specifically for easy set up to meet job site demands, all parts store right on the puller. No gang box of parts needed. When extra extensions are used, the wire puller is capable of pulling out 13′ of wire from the conduit opening. Gone are the days of pulling at only 6 feet per minute. iTOOLco’s Cannon 12K™ pulls at speeds up to 36 ‘ per minute. This versatile cable puller is easy to maneuver, and can be changed quickly from side pulls to overhead or underground. The Cannon 12K™ is the only 12,000 lb. wire puller that can be attached to the receiver hitch on a truck.

      • 12,000 lb. pulling capacity
      • Customized motor with reverse gear
      • 6 Speed dual capstan
      • 5′, 10′ & 15′ (per min.) on low speed, 12′, 24′ & 36′ on high speed
      • Self-contained – ready to pull
      • Quickly change from side pull to overhead, underground or truck hitch
      • No gang box of parts
      • Adjustable counter-balance for easy setup and a 15 lb. working weight
      • Extra 33” & 15” extensions allow for longer reach
      • Pulls out 13 feet of extra wire from conduit opening to capstan
      • Rear swiveling casters for job site transportation and precise conduit positioning
      • Universal adapter – the universal adapter sits on the conduit lock nut, fits a wide range of sizes, and often eliminates the need to use the conduit adapters on lighter pull
      • Extra receiver hitch adapter
      • No anchoring required
      • Easily maneuvers into tight spaces
  • Conduit AdaptersConduit Adapters

    Conduit Adapters

    0 out of 5

    Compatible with the Cannon 6K and the Cannon 10k wire pullers, iTOOLco’s 5″ and 6″ Conduit Adapters provide the ultimate flexibility on every wire pull.

  • Curb RollerCurb Roller

    Curb Roller by iTOOLco

    0 out of 5

    Rounding curbs, edges, or pipes on wire pulls has never been easier.  With iTOOLco’s Curb Roller, wire rides on 5 bearinged rollers for a smooth feed.

    • Four 1/2″ mounting holes provided for any unique feeding situation
    • Perfect for many different pulling and feeding situations – curbs, manholes, in and out of electrical boxes
    • Will roll rope or wire over any edge
    • Five rollers with bearings makes rounding edges smooth and easy
    • Use on feeds around any sharp corner
    • Five roller design make the tool lighter than typical curb roller
    • Use with iTOOLco Real Jacks
    • Mounts over 2″ rigid pipe
  • Draw StudsDraw Studs

    Draw Studs

    0 out of 5
  • Hanging SheaveHanging Sheave

    Hanging Sheave

    0 out of 5

    iTOOLco's Hanging Sheave is the perfect tool for overhead wire pulls.   With an adjustable center sheave, the Hanging Sheave has a pulling radius that varies from 24″ to 36″.
    • Pinned steel yoke for easy removal
    • Steel frame for heavy wire pulls
    • Four bearings in each roller for much easier wire pulls
    • High impact nylon rollers won’t break

  • Hitch PinsHitch Pins

    Hitch Pins for Cable Pullers

    0 out of 5

    Hitch pins for iTOOLco cable pullers (Cannon 6K and Cannon 10K) and tools

  • Jack Rack™Jack Rack™

    Jack Rack™ for iTOOLco Real Jacks

    0 out of 5

    Transport multiple sets of Real Jacks jack stands & Real Axles easily.

    • Transport 5 Sets of Jacks and Axles at Once
    • Fits Through 30″ Doorways
    • Made From Sturdy US Steel
    • Convenient Fixed Handle for Hand Trucking About The Job Site
    • Heavy Duty Caster with Brakes

iTOOLco

iTOOLco logo orange