-
Request a QuoteQuick View24″ Multi-Roller™ by iTOOLco
The 24″ Multi-Roller features extra wide, profiled phenolic rollers. Rollers ride on rated bearings. Extra deep side walls (made from 1/4″ 6061 aluminum) offer a light yet durable tool. The adjustable picking arms allow users to fine tune the adjustment angle without extra rigging.
Sold As Shown. Perfect for vertical wire pulls, but can also be installed horizontally for navigating difficult corners.
- Unlimited configuration opportunities
- Extra wide 5″ profiled rollers, for smooth and easy pulling
- Hooks have 8″ of adjustment
- Extra Deep Sidewalls made of 1/4″ 6061 aluminum and keeps wire safely nested between walls during wire pulls
-
Request a QuoteQuick View36″ Multi-Roller™ by iTOOLco
The 36″ Multi-Roller features extra wide, profiled phenolic rollers. Rollers ride on rated bearings. Extra deep side walls (made from 1/4″ 6061 aluminum) offer a light yet durable tool. The adjustable picking arms allow users to fine tune the adjustment angle without extra rigging.
Sold As Shown. Perfect for vertical wire pulls, but can also be installed horizontally for navigating difficult corners.
- Unlimited configuration opportunities
- Extra wide 5″ profiled rollers, for smooth and easy cable pulling
- Hooks have 8″ of adjustment
- Extra Deep Sidewalls made of 1/4″ 6061 aluminum and keeps wire safely nested between walls during wire pulls
-
Request a QuoteQuick ViewCable Puller & Jack Handles
iTOOLco carries replacement handles for cable pullers – Cannon 6K , Cannon 10K – and Real Jacks.
-
Request a QuoteQuick ViewCord Adapter
-
Request a QuoteQuick ViewCurb Roller by iTOOLco
Rounding curbs, edges, or pipes on wire pulls has never been easier. With iTOOLco’s Curb Roller, wire rides on 5 bearinged rollers for a smooth feed.
- Four 1/2″ mounting holes provided for any unique feeding situation
- Perfect for many different pulling and feeding situations – curbs, manholes, in and out of electrical boxes
- Will roll rope or wire over any edge
- Five rollers with bearings makes rounding edges smooth and easy
- Use on feeds around any sharp corner
- Five roller design make the tool lighter than typical curb roller
- Use with iTOOLco Real Jacks
- Mounts over 2″ rigid pipe
-
Request a QuoteQuick ViewDraw Studs
-
Request a QuoteQuick ViewHanging Sheave
iTOOLco's Hanging Sheave is the perfect tool for overhead wire pulls. With an adjustable center sheave, the Hanging Sheave has a pulling radius that varies from 24″ to 36″.
• Pinned steel yoke for easy removal
• Steel frame for heavy wire pulls
• Four bearings in each roller for much easier wire pulls
• High impact nylon rollers won’t break -
Request a QuoteQuick ViewHitch Pins for Cable Pullers
Hitch pins for iTOOLco cable pullers (Cannon 6K and Cannon 10K) and tools
-
Request a QuoteQuick ViewJack Rack™ for iTOOLco Real Jacks
Transport multiple sets of Real Jacks jack stands & Real Axles easily.
- Transport 5 Sets of Jacks and Axles at Once
- Fits Through 30″ Doorways
- Made From Sturdy US Steel
- Convenient Fixed Handle for Hand Trucking About The Job Site
- Heavy Duty Caster with Brakes
-
Request a QuoteQuick ViewRatchet Cutters for Cable Cutting
• ACSR rated
• Telescoping handles for added leverage
• Cutting capacity of up to 1-3/4″ or 44mm
• Large, comfortable grip
• Includes handy carrying case
• Blades have a 6 year limited warranty -
Request a QuoteQuick ViewReal Big Jacks™ Jack Stands
Real Big Jacks™ jack stands are an innovative way to transport and feed heavy spools of wire.
- Holds up to 20,000 lb.
- Made From US Steel
- Axle Rides on 4 Large Bearing-ed Rollers
- Feed From your Own Trailer
- Transport Spools up to 10,000 lb. Without a Fork Lift (20,000 lb. with a fork lift)
- Telescoping to Fit Different Width Spools
- Load and Reload Without a Forklift
- Easily Maneuver Spools Into Position
Axles sold separately.
-
Request a QuoteQuick ViewReal Jacks™ Jack Stands
iTOOLco’s Real Jacks make wire pulls run smooth and easy. These innovative reel jack stands have four 20,000 lb. sealed bearings that capture the axle to prevent reels from traveling during the pull. Best of all iTOOLco Real Jacks won’t tip over.
- Closed head traps axle prevents it from falling out or traveling horizontally
- Separate sides can be used safely on uneven ground
- Won’t tip over
- Store and transport Real Jacks right on the iTOOLco Real Tender or iTOOLco Jack Rack
- Can be used with 22″ to 66″ spools
- Fits Wemco reels
- Easy to carry at 35 lbs. per side
- Can be used with our axle, a 1.5″ solid or a 2″ rigid pipe
- Set up in less than 1 minute
- Four 20,000 lb. rated bearings make wire pulling smooth and easy
- No drills or extra tools needed
