dot Holemaking – iTOOLco
  • Bulk Step BitsiTOOLco Bit Box Contractor Bulk Step Bits

    Bit-Box™ Contractor Bulk Package of 24 Step Bits

    0 out of 5

    The Bit-Box™ Contractor Bulk Package features 24 step bits made of Tian coated steel drill bits. The self-starting helical flute technology allows for fast and easy punch outs. Kit includes 12 each of two sizes 3/16”-7/8” and 3/16“-1-1/8”.

    • Convenient carrying case means no wasted time looking for bits
    • 24 step bits in two sizes
      • 12 each: 3/16″ to 7/8″
      • 12 each: 3/16″ to 1-1/8″
    • Helical flute step bits
    • Made of strong steel with Tian coating
    • Drills holes in steel, copper, stainless steel, plastic, aluminum, and other materials
    • Self-starting
  • CenterPoint VideoCenter Point Knockout Layout Tool™

    Center Point Knockout Layout Tool™

    0 out of 5

    The Center Point Knockout Layout Tool is 70 Times Faster Than Using A Tape Measure

    • Use on Layouts for Rigid, IMC, and EMT Knockouts
    • Great for pre fab, job site applications, and panel shops
    • Allows for 1-1/8″ or 7/8″ between conduits
    • Features a panel schedule for pulling branch circuits
    • Only three easy steps

    Knocks Outs Done in Four Easy Steps

    1. Mark the first conduit
    2. Mark the strut line
    3. Mark the conduit combination
    4. Mark the center of the hole
  • Draw StudsDraw Studs

    Draw Studs

    0 out of 5
  • Gear Punch Knockout Kit 1/2″ – 2″Gear Punch Knockout Kit 1/2″ – 2″

    Gear Punch Knockout Kit 1/2″ – 2″

    5.00 out of 5

    The Industry’s First Knockout Set with a 6 Year Warranty.

    Rated for mild and stainless steel, iTOOLco’s SLICK-CUT™ technology allows 1/2″ through 6″ punches and dies to cut through an industry leading 10 gauge mild and stainless steel while maintaining the sharpness of the cutting edges. The Gear Punch™ tool will work with any make or model of corded or cordless drill, new or old drills, with no special add-ons required. The punches and dies are clearly marked with trade standard conduit sizes as well as Center Point™ marks for perfect alignment, no matter what direction you cut from.  Lightweight and easy to use, the Gear Punch™ tool is compatible with other punch and die offerings and comes with a lifetime replacement on draw studs.

    • Gear Punch, SS 10ga. Rated
    • Knockouts 1/2″ through 6″
    • Draw Stud (lifetime Warranty)
    • Step Bits Helical TiAn Coated
    • 3/8″ Nut Drivers
    • Center Point Knockout Layout Tool
    • Fast and Easy With Cordless Drill
    • No Leaking Hydraulics
    • No Hydraulic Seals to Replace
  • Punch and Die SetsGear Punch Knockout Kit 1/2" - 4"

    Gear Punch Knockout Set 1/2″ – 4″

    5.00 out of 5

    The Industry’s First Knockout Set with a 6 Year Warranty

    Rated for mild and stainless steel, iTOOLco’s SLICK-CUT™ technology allows 1/2″ through 4″ punches and dies to cut through an industry leading 10 gauge mild and stainless steel while maintaining the sharpness of the cutting edges. The Gear Punch™ tool will work with any make or model of corded or cordless drill, new or old drills, with no special add-ons required. The punches and dies are clearly marked with trade standard conduit sizes as well as Center Point™ marks for perfect alignment, no matter what direction you cut from.  Lightweight and easy to use, the Gear Punch™ tool is compatible with other punch and die offerings and comes with a lifetime replacement on draw studs.

    • Gear Punch, SS 10ga. Rated
    • Knockouts 1/2″ through 4″
    • Draw Stud (lifetime Warranty)
    • Step Bits Helical TiAn Coated
    • 3/8″ Nut Drivers
    • Center Point Knockout Layout Tool
    • Fast and Easy With Cordless Drill
    • No Leaking Hydraulics
    • No Hydraulic Seals to Replace
  • Punch and Die SetsGear Punch Knockout Kit 1/2" - 6"

    Gear Punch Knockout Set 1/2″ – 6″

    5.00 out of 5

    The Industry’s First Knockout Set with a 6 Year Warranty

    Rated for mild and stainless steel, iTOOLco’s SLICK-CUT™ technology allows 1/2″ through 6″ punches and dies to cut through an industry leading 10 gauge mild and stainless steel while maintaining the sharpness of the cutting edges. The Gear Punch™ tool will work with any make or model of corded or cordless drill, new or old drills, with no special add-ons required. The punches and dies are clearly marked with trade standard conduit sizes as well as Center Point™ marks for perfect alignment, no matter what direction you cut from.  Lightweight and easy to use, the Gear Punch™ tool is compatible with other punch and die offerings and comes with a lifetime replacement on draw studs.

    • Gear Punch, SS 10ga. Rated
    • Knockouts 1/2″ through 6″
    • Draw Stud (lifetime Warranty)
    • Step Bits Helical TiAn Coated
    • 3/8″ Nut Drivers
    • Center Point Knockout Layout Tool
    • Fast and Easy With Cordless Drill
    • No Leaking Hydraulics
    • No Hydraulic Seals to Replace
  • Punch and Die Set 2-1/2" - 4"Punch and Die Set 2-1/2" - 4"

    Punch and Die Set 2-1/2″ – 4″

    0 out of 5

    The Industry’s First Knockout Set with a 6 Year Warranty

    Rated for mild and stainless steel, iTOOLco’s SLICK-CUT™ technology allows 1/2″ through 6″ punches and dies to cut through an industry leading 10 gauge mild and stainless steel while maintaining the sharpness of the cutting edges. The Gear Punch™ tool will work with any make or model of corded or cordless drill, new or old drills, with no special add-ons required. The punches and dies are clearly marked with trade standard conduit sizes as well as Center Point™ marks for perfect alignment, no matter what direction you cut from.  Lightweight and easy to use, the Gear Punch™ tool is compatible with other punch and die offerings and comes with a lifetime replacement on draw studs.

    • Gear Punch, SS 10ga. Rated
    • Knockouts 1/2″ through 6″
    • Draw Stud (lifetime warranty)
    • Step Bits Helical TiAn Coated
    • 3/8″ Nut Drivers
    • Center Point Knockout Layout Tool
    • Fast and Easy With Cordless Drill
    • No Leaking Hydraulics
    • No Hydraulic Seals to Replace
  • Punch and Die SetsPunch and Die Sets

    Punch and Die Sets

    0 out of 5

    iTOOLco’s punch and die sets make quick work of punching conduit holes.

    • Cleaner, quicker and easier cut for 1/2″ thru 6″ dies
    • Rated for 10 gauge stainless steel, mild steel, and aluminum
    • Will not contort panel
    • Leaves clean edges
    • Quicker, smoother cut
  • Step Bits by iTOOLcoStep Bits

    Step Bits

    0 out of 5
    • Replace individual drill bits
    • Helical flute
    • Made of strong steel with Tian coating
    • Drills holes in steel, copper, stainless steel, plastic, aluminum, and other materials
    • Self-starting

iTOOLco

iTOOLco logo orange
Contact Us