dot
  • Cannon 12K™ Wire Puller

    0 out of 5

    The only 6-speed puller with reverse gear, dual capstans and 12,000 lb. of pulling capacity.

    The fully self-contained, compact design of the Cannon 12K™ wire puller features the only speed reversible motor that is sure to get even the heaviest pulls done in record time. Designed specifically for easy set up to meet job site demands, all parts store right on the puller. No gang box of parts needed. When extra extensions are used, the wire puller is capable of pulling out 13' of wire from the conduit opening. Gone are the days of pulling at only 6 feet per minute. iTOOLco’s Cannon 12K™ pulls at speeds up to 36 ' per minute. This versatile cable puller is easy to maneuver, and can be changed quickly from side pulls to overhead or underground. The Cannon 12K™ is the only 12,000 lb. wire puller that can be attached to the receiver hitch on a truck.

      • 12,000 lb. pulling capacity
      • Customized motor with reverse gear
      • 6 Speed dual capstan
      • 5′, 10' & 15′ (per min.) on low speed, 12′, 24' & 36' on high speed
      • Self-contained – ready to pull
      • Quickly change from side pull to overhead, underground or truck hitch
      • No gang box of parts
      • Adjustable counter-balance for easy setup and a 15 lb. working weight
      • Extra 33” & 15” extensions allow for longer reach
      • Pulls out 13 feet of extra wire from conduit opening to capstan
      • Rear swiveling casters for job site transportation and precise conduit positioning
      • Universal adapter – the universal adapter sits on the conduit lock nut, fits a wide range of sizes, and often eliminates the need to use the conduit adapters on lighter pull
      • Extra receiver hitch adapter
      • No anchoring required
      • Easily maneuvers into tight spaces
  • Cannon 6K™ Wire Puller

    Cannon 6K™ Wire Puller

    5.00 out of 5

    The Cannon 6K is two wire pullers in one with dual capstans that can pull 8′ and 28′ per minute on low speed and 20′ and 70′ feet per minute on high speed.  This versatile wire puller is lightweight and easy to transport, making it the puller of choice for many electrical contractors and electricians.

    • 4 Speed dual capstan
    • 8′ & 28′ (per min.) on low speed, 20′ & 70′ on high speed
    • Self contained– ready to pull
    • Quickly change from side pull to overhead, underground or truck hitch
    • No gang box of parts
    • Pulls out 9 feet of extra wire
    • No anchoring required
    • Easy to transport
    • Telescoping
    • Easily maneuvers into tight spaces

  • Conduit AdaptersConduit Adapters

    Conduit Adapters

    0 out of 5

    Compatible with the Cannon 6K and the Cannon 10k wire pullers, iTOOLco’s 5″ and 6″ Conduit Adapters provide the ultimate flexibility on every wire pull.

  • Curb RollerCurb Roller

    Curb Roller by iTOOLco

    0 out of 5

    Rounding curbs, edges, or pipes on wire pulls has never been easier.  With iTOOLco’s Curb Roller, wire rides on 5 bearinged rollers for a smooth feed.

    • Four 1/2″ mounting holes provided for any unique feeding situation
    • Perfect for many different pulling and feeding situations – curbs, manholes, in and out of electrical boxes
    • Will roll rope or wire over any edge
    • Five rollers with bearings makes rounding edges smooth and easy
    • Use on feeds around any sharp corner
    • Five roller design make the tool lighter than typical curb roller
    • Use with iTOOLco Real Jacks
    • Mounts over 2″ rigid pipe
  • Hanging SheaveHanging Sheave

    Hanging Sheave

    0 out of 5

    iTOOLco's Hanging Sheave is the perfect tool for overhead wire pulls.   With an adjustable center sheave, the Hanging Sheave has a pulling radius that varies from 24″ to 36″.
    • Pinned steel yoke for easy removal
    • Steel frame for heavy wire pulls
    • Four bearings in each roller for much easier wire pulls
    • High impact nylon rollers won’t break

  • Heavy Duty Pipe Cart

    0 out of 5

    0%

      Click and drag the image to see a 360º view.

    1. LIP (Lock-in-Place) Conduit Sheaves VideoLIP Conduit Sheaves

      L.I.P.™ Conduit Feeding Sheaves

      0 out of 5

      L.I.P.™ (Lock-in-Place) Conduit Feeding Sheaves make it possible to lock sheaves in place at any angle or inclination. The phenolic resin wheel is more durable than cast and won’t dent or break. Unlike conventional sheaves, L.I.P.™ Conduit Feeding Sheaves enable the installer to stay clear of the equipment, keeping hands and limbs safely out of the way. Needle bearing rollers ensure a smooth installation by minimizing drag on the pull and reducing the risk of damaging valuable wire. With a fully adjustable thread depth, these sheaves provide unlimited flexibility on the job and significantly simplify the process of feeding wire. Ranging in sizes from 2” to 4”, the sheaves can be purchased individually or as a complete set of five. 5” and 6” also available in non-locking.

    2. Line SwivelsLine Swivels

      Line Swivels

      0 out of 5

      iTOOLco Line Swivels prevent damage to the cable on wire pulls.  Quality tested to ensure optimum performance and reliability, iTOOLco Line Swivels combine a high safe working load with a compact design.

      • Helps eliminate winding and tangling of rope and cable during pull
      • Connects grip and pulling rope
      • Select the swivel with a maximum rated capacity that meets or exceeds the cable puller’s maximum pulling force
      • For cable pulling in overhead and underground applications
      • Easy on the rope
    3. Pull Slick™ RopePull Slick™ Rope

      Pull Slick™ Rope – Wire Pulling Rope

      0 out of 5
        • An innovative high-performance synthetic fiber wire pulling rope
        • High tensile strength: 39,000 lb.
        • 12 Strand single braided synthetic fiber
        • Pound for pound stronger than steel
        • Ultra-low stretch
        • 25% Reduction in coefficient of friction compared to traditional pulling ropes
        • 2/3 Lighter than traditional pulling rope
        • Need only one size rope (9/16″) for pulls up to 15,000 lb. pulls
        • Does not absorb water
        • Dual factory installed pulling eyes, one on either end
        • Lightweight
        • Abrasion resistance for less fray
        • Will not rot; no organics in rope
        • UV resistant

      We also carry Standard Pulling Rope.

    4. Ratchet CuttersRatchet Cutters

      Ratchet Cutters for Cable Cutting

      5.00 out of 5

      • ACSR rated
      • Telescoping handles for added leverage
      • Cutting capacity of up to 1-3/4″ or 44mm
      • Large, comfortable grip
      • Includes handy carrying case
      • Blades have a 6 year limited warranty

    5. Standard Conduit SheavesStandard Conduit Sheaves

      Standard Conduit Sheaves

      0 out of 5

      iTOOLco Standard Conduit Sheaves are designed to fit into all types of conduit.  The heavy duty industrial design will not let you down on the job.   The phenolic resin roller – not cast metal – glides smoothly for easy cable pulling or on heavy primary cable loads.

    6. Standard Wire Pulling RopeStandard Wire Pulling Rope

      Standard Wire Pulling Rope

      0 out of 5

      iTOOLco’s Standard Wire Pulling Rope ranges in widths from 1/4″ to 7/8″ for cable or wire pulls.

      • Double braided for added strength
      • Rot and mildew resistant
      • Factory spliced eyes at both ends
      • Low stretch

    iTOOLco

    iTOOLco logo orange
    Contact Us