dot
Cannon 6K™ Wire Puller

iTOOLco Upgrades Cannon 6K Wire Puller

OAK RIDGE, TN. (July 2, 2018) – iTOOLco, a leading developer of products that increase safety, save time, lower worker effort, and improve results for hard-working contractors and the professionals they employ, announced today that it has upgraded its Cannon 6K™ wire puller. The new version of this top performing product (part number C6K.2) is faster and has an even broader application than the original Cannon 6K.

With a capacity of up to 6,000 lb., iTOOLco’s Cannon 6K™ has a 4-speed motor and dual capstans that pull at speeds up to 8′ and 28′ per minute on low and 20′ and 70′ feet per minute on high.  Fitted with a 30” extension for longer reach, the Cannon 6K™ is capable of pulling out 9’ of wire from the conduit opening to capstan and changes quickly from side pulls to overhead or underground. In addition, the foot switch now stores right on the wire puller.

“Anyone who knows iTOOLco knows we never stop innovating,” said David Jordan, President at iTOOLco. “When we spotted a way to improve this already-great product, we couldn’t pass up the opportunity to pass it on to our contractors. So we made it happen.”

Anchoring the Cannon 6K™is not required on most jobs. It is the only 6,000 lb. wire puller that can be attached to the receiver hitch on a truck and can be anchored in the event that anchoring is necessary. Fully self-contained and compact, all of the wire puller’s parts store right on the tool, so no gang box of parts needed. The Cannon 6K™ wire puller continues to be lightweight and easy to transport, making it the puller of choice for many electrical contractors and electricians.

About iTOOLco

Invented by Electricians for Electricians. For many years, iTOOLco has improved the work lives of professional electricians and contractors through our innovative products. Our primary focus is developing products that increase safety, save time, lower worker effort, and improve results for hard-working contractors and the professionals they employ. iTOOLco’s ingenious tooling delivers “measurable advantages” and brings innovation to your job site. Visit iTOOLco.com

Read more...

iTOOLco Launches First 6-Speed Wire Puller With Reverse Gear

OAK RIDGE, TN. (May 8, 2018) – iTOOLco, a leading developer of products that increase safety, save time, lower worker effort, and improve results for hard-working contractors and the professionals they employ, announced today the introduction of the industry’s first ever six-speed dual capstan wire puller with reverse gear – the iTOOLco Cannon 12K™.

With a capacity of up to 12,000 lb., iTOOLco’s Cannon 12K™’scustom reversible motor is sure to get even the heaviest wire pulls completed in record time.  The six-speed dual capstans pull at speeds up 5’, 10’ and 15’ per minute on low and 12’, 24’, and 36’ per minute on high.

“Contractors told us they wanted a wire puller with a larger capacity and a reverse motor,” said David Jordan, President at iTOOLco. “We answered with the Cannon 12K and the contractors who have seen it in action are thrilled with its performance.”

The Cannon 12K™ has an adjustable counter-balance for easy setup and a 15 lb. working weight, making it easy for one person to maneuver.  Rear swiveling casters make job site transportation and precise conduit positioning safer and faster.

Fitted with extensions in 33” and 15” for longer reach, the Cannon 12K™ is capable of pulling out 13’ of wire from the conduit opening to capstan and changes quickly from side pulls to overhead or underground. Anchoring is not required on most jobs. Fully self-contained and compact, all of the wire puller’s parts store right on the tool, so no gang box of parts needed. It is the only 12,000 lb. wire puller that can be attached to the receiver hitch on a truck and comes with an extra receiver hitch adapter in the even that anchoring is necessary.

About iTOOLco

Invented by Electricians for Electricians. For many years, iTOOLco has improved the work lives of professional electricians and contractors through our innovative products. Our primary focus is developing products that increase safety, save time, lower worker effort, and improve results for hard-working contractors and the professionals they employ. iTOOLco’s ingenious tooling delivers “measurable advantages” and brings innovation to your job site. Visit iTOOLco.com

Read more...

iTOOLco Featured in Electrical Contractor Magazine

Knoxville, TN (March 22, 2018) – Electrical Contractor, the premier monthly print and online publication that serves the field of electrical construction, featured iTOOLco’s Cannon 6K and Cannon 10K wire pullers in the March 2018 issue.

The article, entitled Cool Tools: Cable Pullers, appears in the issue’s Systems section which highlights different types from work from security, fire and life safety to traditional electrical power and distribution, to lighting, cabling and more.

The article profiles recent improvements to electric cable pulling and support equipment-as well as accessories that expedite the pulling process- to make the work easier and faster, ultimately increasing the number of pulls in a work day.

Creating faster, safer workspaces drives the development of every new tool we invent so we are thrilled to be featured in this article. Thank you Electrical Contractor!

View the digital version of Cool Tools: Cable Pullers

Read more...
Cannon 10K wire puller pulls 800 feet of wire in 35 minutes 333 x 250

Cannon 10K Wire Puller Pulled 800′ of wire in 35 mins!

Our Cannon 10K wire puller consistently performs in the field.  One of our reps recently joined a customer on a wire pull and reported outstanding results – as usual.  The powerful tugger pulled 800′ of wire in just 35 minutes.  These results are the norm with the Cannon 10K.

See the original post and additional commentary on LinkedIn (be sure to follow us when you get there).

Schedule an onsite demo.

Read more...

iTOOLco

iTOOLco logo orange
Contact Us