Cable Pulling – iTOOLco
  • 10" Cable Tray Roller™10" Cable Tray Roller™

    10″ Cable Tray Roller™

    0 out of 5

    iTOOLco’s 10″ Cable Tray Rollers install in three easy steps and are compatible with more construction substrates than the competition.

    Simply:

    1. Drop-over
    2. Tighten
    3. Pin

    • Installs 10X faster than standard tray rollers
    • Secures into place with two locking underpins
    • Withstands cable pulling loads of up to 2,000 lb.*
    • No loose pieces to get in the way
    • Each roller rides on rated bearings
    • Steel welded frame
    • Versatility to handle a variety strut types & supporting members
    • Rollers glide smoothly – even with multiple cables in the tray
    • Can install above or below the tray

  • 20" Cable Tray Roller™20" Cable Tray Roller™

    20″ Cable Tray Roller™

    0 out of 5

    iTOOLco’s 20″ Cable Tray Rollers install in three easy steps and are compatible with more construction substrates than the competition.

    Simply:

    1. Drop-over
    2. Tighten
    3. Pin

    • Installs 10X faster than standard tray rollers
    • Secures into place with two locking underpins
    • Withstands cable pulling loads of up to 2,000 lb.*
    • No loose pieces to get in the way
    • Each roller rides on rated bearings
    • Steel welded frame
    • Versatility to handle a variety strut types & supporting members
    • Rollers glide smoothly – even with multiple cables in the tray
    • Can install above or below the tray

  • 24" Multi-Roller™24" Multi-Roller™

    24″ Multi-Roller™

    0 out of 5

    The 24″ Multi-Roller features extra wide, profiled phenolic rollers. Rollers ride on rated bearings. Extra deep side walls (made from 1/4″ 6061 aluminum) offer a light yet durable tool. The adjustable picking arms allow users to fine tune the adjustment angle without extra rigging.

    Sold As Shown. Perfect for vertical pulls, but can also be installed horizontally for navigating difficult corners.

    • Unlimited configuration opportunities
    • Extra wide 5″ profiled rollers, for smooth and easy pulling
    • Hooks have 8″ of adjustment
    • Extra Deep Sidewalls made of 1/4″ 6061 aluminum and keeps wire safely nested between walls during pull
  • 30" Cable Tray Roller™30" Cable Tray Roller™

    30″ Cable Tray Roller™

    0 out of 5

    iTOOLco’s 30″ Cable Tray Rollers install in three easy steps and are compatible with more construction substrates than the competition.

    Simply:

    1. Drop-over
    2. Tighten
    3. Pin

    • Installs 10X faster than standard tray rollers
    • Secures into place with two locking underpins
    • Withstands cable pulling loads of up to 2,000 lb.*
    • No loose pieces to get in the way
    • Each roller rides on rated bearings
    • Steel welded frame
    • Versatility to handle a variety strut types & supporting members
    • Rollers glide smoothly – even with multiple cables in the tray
    • Can install above or below the tray

  • 24" Multi-Roller™36" Multi-Roller™

    36″ Multi-Roller™

    0 out of 5

    The 24″ Multi-Roller features extra wide, profiled phenolic rollers. Rollers ride on rated bearings. Extra deep side walls (made from 1/4″ 6061 aluminum) offer a light yet durable tool. The adjustable picking arms allow users to fine tune the adjustment angle without extra rigging.

    Sold As Shown. Perfect for vertical pulls, but can also be installed horizontally for navigating difficult corners.

    • Unlimited configuration opportunities
    • Extra wide 5″ profiled rollers, for smooth and easy pulling
    • Hooks have 8″ of adjustment
    • Extra Deep Sidewalls made of 1/4″ 6061 aluminum and keeps wire safely nested between walls during pull
  • 5" Cable Tray Roller™5" Cable Tray Roller™

    5″ Cable Tray Roller™

    0 out of 5

    iTOOLco’s 5″ Cable Tray Rollers install in three easy steps and are compatible with more construction substrates than the competition. Installs 10X faster than standard tray rollers and secures into place with two locking underpins.

    Simply:

    1. Drop-over
    2. Tighten
    3. Pin

    • Withstands cable pulling loads of up to 2,000 lb.*
    • No loose pieces to get in the way
    • Each roller rides on rated bearings
    • Steel welded frame
    • Versatility to handle a variety strut types & supporting members
    • Rollers glide smoothly – even with multiple cables in the tray
    • Can install above or below the tray

  • 90° Trapping Tray Roller™90° Trapping Tray Roller™

    90° Trapping Tray Roller™

    0 out of 5

    iTOOLco’s 90° Trapping Tray Rollers install in three easy steps and are compatible with more construction substrates than the competition.

    1. Drop-over
    2. Tighten
    3. Pin

    Navigating difficult corners is a snap with 90° Trapping Tray Rollers. Two TR9010s combine to trap conductors and handle elevation changes. It opens and closes from either side providing the utmost job-site flexibility.

  • Adjustable Tray Roller™Adjustable Tray Roller™

    Adjustable Tray Roller™

    0 out of 5

    iTOOLco’s Adjustable Cable Tray Roller is the perfect upgrade from a standard cable roller. Designed to save time by installing quickly, the Adjustable Cable Tray Roller has a slide support that can be extended to fit on tray rung spaces from 10″ to 21-1/4″.

    • Installs 10X faster than standard cable rollers
    • Adjusts quickly and easily to varying rung spaces
    • Secures into place with two wing nuts
    • No additional tools needed
    • Lightweight
    • No loose pieces to get in the way
    • Phenolic resin rollers cradle cable so it glides smoothly
    • Adjustable steel slide support can be extended to fit on tray rung spaces from 10” to 21-1/4”
    • Won’t damage cable
    • Roller rides on rated bearings
    • Base unit is adaptable for top roller assembly (TRA500)

  • Cannon 10K™ Puller KnucklesCannon 10K™ Puller Knuckles

    Cannon 10K™ Puller Knuckles

    0 out of 5

    Cannon 10K Puller Knuckles

  • Cannon 10K™ Wire PullerCannon 10K™-M1 Package

    Cannon 10K™ Wire Puller

    5.00 out of 5

    iTOOLco’s Cannon 10K* is the fastest and strongest wire puller on the market. This versatile puller is easy to maneuver, and can be changed quickly from side pulls to overhead or underground. The Cannon 10K is the only 10,000 lb. wire puller that can be attached to the receiver hitch on a truck.

    • 4 Speed dual capstan
    • 9′ & 18′ (per min.) on low speed, 20′ & 40′ on high speed
    • Self-contained – ready to pull
    • Quickly change from side pull to overhead, underground or truck hitch
    • No gang box of parts
    • Adjustable counter-balance for easy setup and a 15 lb. working weight
    • Pulls out 13 feet of extra wire
    • Universal adapter – the universal adapter sits on the conduit lock nut, fits a wide range of sizes, and often eliminates the need to use the conduit adapters on lighter pull
    • No anchoring required
    • Easily maneuvers into tight spaces

    *Pictured with the Cannon 10K-M1 Package Upgrade 

  • Cannon 10K™-M1 PackageCannon 10K™-M1 Package

    Cannon 10K™-M1 Package

    0 out of 5

    The M1 package is a great addition to the base model Cannon 10K™ wire puller. This accessory package will allow even more job site flexibility. The design of this package allows you to upgrade your existing Cannon 10K™ wire puller or order it with your new puller.

    • Extra extensions 33″ and 15″ allow for longer reach—getting you 13' of wire from conduit opening to capstan
    • All new parts store right on the Cannon 10K™
    • Larger front knuckle with profiled phenolic roller
    • Rear swiveling casters for job site transportation and precise conduit positioning
    • Extra receiver hitch adapter for occasions when bolting the wire puller to the floor is necessary
  • Cannon 6K Wire Puller videoCannon 6K™ Wire Puller

    Cannon 6K™ Wire Puller

    5.00 out of 5

    The Cannon 6K is two wire pullers in one with dual capstans that can pull 8′ and 28′ per minute on low speed and 20′ and 70′ feet per minute on high speed.  This versatile wire puller is lightweight and easy to transport, making it the puller of choice for many electrical contractors and electricians.

    • 4 Speed dual capstan
    • 8′ & 28′ (per min.) on low speed, 20′ & 70′ on high speed
    • Self contained– ready to pull
    • Quickly change from side pull to overhead, underground or truck hitch
    • No gang box of parts
    • Pulls out 9 feet of extra wire
    • No anchoring required
    • Easy to transport
    • Telescoping
    • Easily maneuvers into tight spaces

iTOOLco

iTOOLco-pocket-logo-orange
Contact Us